Price for A-Clima services

Transparent pricing for climate solutions tailored to your needs.
Explore our service rates for air conditioner installation, maintenance, cleaning, and repair.
No hidden fees — just clear, fair pricing and top-quality work across Costa del Sol, Barcelona & Madrid.

Costa del Sol
Madrid
Barcelona
Service and repair
Price €
(con IVA)
Professional cleaning of wall-mounted air conditioners
75
Professional cleaning of duct-type air conditioners
95
Professional cleaning of cassette-type air conditioners
130
Washing the outdoor unit of a single-fan air conditioner
40
Washing the external unit of a two-fan air conditioner
60
Manufacture of filters for duct-type air conditioners
25
Diagnostics of air conditioners up to 10 kW
60
Diagnostics of air conditioners 10-16 kW
95
Technician visit + diagnostics outside the service area price per km
under discussion
Replacement of compressor condenser price per set
250
Replacement or repair of the control board
from 500
Air conditioner refill with freon (freon R-410, R-32) price per 100 g
30
Replacement of thermal insulation Price per m/page
15
Repairing the drainage system or cleaning it
85
Installation of a drainage pump
125
Elimination of freon leakage split up to 5 kW capacity
180
Elimination of freon leakage in split systems with a capacity of 5-12 kW
300
Elimination of freon leakage in multi-split systems with a capacity of up to 12 kW
350
Transportation costs
25
Specialist visit to calculate the installation of air conditioning systems
50
Installation work
Price €
(con IVA)
The set includes (2 pipes, insulation, inter-unit connection cable, drainage)
Interblock main line kit price per m/p 6-9 mm (1/4-3/8)
48
Interblock main line set price per m/p 6-12 mm (1/4-1/2)
51
Conjunto de tubería intermedia Precio por metro lineal 9-16 mm (3/8-5/8)
54
Interblock main line kit price per m/p 12-19 mm (1/2-3/4)
61
Chasing for main line price per m/p
36
Laying of inter-block trunk line (2 copper pipes, inter-block cable, drainage) with regard to laying communications or if installation is more than 3 meters
24
Connection to the drainage system, including materials (installation of a siphon, a groove for it, fittings, transitions)
97
Insertion into a drainpipe of any diameter, special connector for the pipe
61
Installation of drainage “broaching” if this is not included in the *standard* price per 1 m, taking into account soft or rigid pipes + fittings and fasteners
12
Installation of a drainage pump
97
Installation of decorative box, taking into account the material with Fasina, price per 1 meter under the main line
30
Manufacture of air ducts from sheet insulation 400x200, price per 1 m of product
91
Manufacture of air ducts from sheet insulation 600x200, price per 1 m of product
103
Manufacture of air ducts from sheet insulation 800x200, price per 1 m of product
121
Manufacture of air ducts from sheet insulation adapter or complex shape price per product
145
Cable up to 2.5 square meters, including corrugation, price per meter/piece. Pull using your preferred method, either separately from the outlet or from the switchboard, price per meter
12
Low-voltage cable, including corrugation, price per meter/length. Pulling using preferred methods, price per meter
6
Dismantling/installation of Armstrong ceiling type price per m2
30
Removing the ceiling to the right size or enlarging the opening, plasterboard type, price per opening
61
Transportation costs are only paid for trips to Malaga-Manilva, or if there is a delay on the part of the customer and we need to make a repeat trip.
24
Urgent diagnostics: travel expenses of €20 are payable; price depends on the system: materials are charged separately, service cost is 50/50.
61
Installation of the AirZone system
Price €
(con IVA)
AirZone installation: complete pre-installation, pulling of communications, including corrugated pipes and cables, installation of motorized grilles. Price per zone, including centrolites, etc.
242
Installation of AirZone after installation or on ready-made communications, taking into account corrugated pipes and cables, taking into account the installation of a motorized grille, price per zone
121
Installation of diffusers + marking, or installation of motorized diffusers under AirZone
36
* INSTALLATION STANDARD *
1. The outdoor unit is mounted on vibration mounts if there are intermediate brackets + vibration mounts on the bracket.
2. The minimum length of the inter-unit route is 3 m.
3. Drainage (winter) is carried out to the nearest drain point up to 1.5 m, if further according to p9.
4. The installer is obliged to work with a vacuum cleaner and leave the site clean!
Wall-mounted units
Price €
(con IVA)
Installation of a wall-mounted split air conditioner 09-12 (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main line
303
Installation of a wall-mounted split air conditioner 18-24 (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main line
363
Installation of an indoor wall-mounted multi-unit or addition of one indoor unit. Taking into account the scope of work. Separate call-out fee.
121
Installation of an indoor wall-mounted multi-unit or addition of one indoor unit. Taking into account the scope of work. Separate call-out fee.
242
Installation of an outdoor split unit up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
242
Installation of an outdoor split unit up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
303
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
363
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
460
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
303
Installation of an outdoor multi-split system up to 12 kW, including connection. Including a range of works. Travel expenses are charged separately.
424
Dismantling of wall-mounted split air conditioner up to 7 kW + disposal. Taking into account the scope of work. Separate call-out fee.
61
Dismantling of wall-mounted split units up to 7 kW. Including a range of works. Separate call-out charge.
182
Disassembly of a separate wall-mounted unit up to 7 kW, separate trip before repair, taking into account the road within the Costa del Sol area.
145
Disassembly of a separate outdoor unit up to 10 kW, separate call-out
182
Dismantling of a separate outdoor unit 12-16 kW separate trip taking into account the classic location, taking into account elevators (excluding cranes and hoists)
242
Installation of air conditioners in difficult conditions (metal structures, at height, multiple walls, or other conditions as agreed)
61
Channel blocks
Price €
(con IVA)
Installation of a split duct air conditioner up to 10 kW (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation, adapter + material, connection of wall-mounted remote control or pulling wires for remote control if there is corrugated pipe) WITHOUT main lines, WITHOUT dismantling/installation of ceilings.
726
Installation of a split duct air conditioner up to 12-16 kW (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation, adapter + material, connection of a wall-mounted control panel or pulling wires for the control panel if there is a corrugated pipe) WITHOUT main lines, WITHOUT dismantling/installation of ceilings.
968
Installation of an indoor duct multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation, adapter + materials) WITHOUT dismantling/installing ceilings, taking into account the scope of work!
424
Installation of an indoor duct multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation, adapter + materials) WITHOUT dismantling/installing ceilings). Travel expenses are charged separately.
484
Installation of an outdoor split unit up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
242
Installation of an outdoor split unit up to 12 kW, including connection. Including a range of works. Travel expenses charged separately.
303
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
363
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
460
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
303
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
424
Dismantling of a duct split system up to 10 kW + disposal. Taking into account the scope of work. Separate call-out fee.
182
Dismantling of a 12-16 kW split duct unit + disposal, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate call-out fee.
303
Dismantling of a duct split system up to 10 kW + disposal. Taking into account the scope of work. Separate call-out fee.
182
Dismantling of a 12-16 kW split duct unit + disposal, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate call-out fee.
303
Installation of air conditioners in difficult conditions (metal structures, at height, multiple walls, or other conditions as agreed)
61
Console (wall-ceiling) blocks
Price €
(con IVA)
Installation of a 5-12 kW split console air conditioner (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main line
605
Installation of a 13-16 kW split console air conditioner (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main line
847
Installation of an indoor console/cassette multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation) (WITHOUT dismantling/installing ceilings), taking into account the scope of work!
363
Installation of an indoor console/cassette multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation) (WITHOUT dismantling/installing ceilings). Taking into account the scope of work. Travel expenses are charged separately.
460
Installation of an outdoor split unit up to 12 kW, including connection. Including a range of works. Travel expenses charged separately.
242
Installation of an outdoor split unit up to 12 kW, including connection. Including a range of works. Travel expenses charged separately.
303
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
363
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
460
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
303
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
424
Dismantling of split console/cassette up to 10 kW + disposal. Taking into account the scope of work. Separate call-out fee.
121
Dismantling of split console cassette 12-16 kW + disposal, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate departure.
182
Disassembly of a separate indoor unit of up to 16 kW, separate trip by type of repair, taking into account the road within the Costa del Sol area.
303
Dismantling of split duct systems up to 10 kW. Separate call-out charge.
363
Dismantling of a 12-16 kW split duct unit, taking into account the classic layout and elevators (excluding cranes and hoists). Separate departure.
363
Disassembly of a separate outdoor unit up to 10 kW, separate call-out
182
Dismantling of a separate outdoor unit 12-16 kW separate trip taking into account the classic location, taking into account elevators (excluding cranes and hoists)
242
Installation of air conditioners in difficult conditions (metal structures, at height, multiple walls, or other conditions as agreed). Taking into account the complexity of the work. Travel expenses are charged separately.
61
Cassette units
Price €
(con IVA)
Installation of a 5-12 kW split cassette air conditioner (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main lines, WITHOUT dismantling/installing ceilings.
605
Installation of a 13-16 kW split cassette air conditioner (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main lines, WITHOUT dismantling/installing ceilings.
847
Installation of an indoor console/cassette multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation) (WITHOUT dismantling/installing ceilings), taking into account the scope of work!
363
Installation of an indoor console/cassette multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation), (WITHOUT dismantling/installing ceilings). Taking into account the scope of work. Travel expenses are charged separately.
460
Installation of an outdoor split unit up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
242
Installation of an outdoor split unit up to 12 kW, including connection. Including a range of works. Travel expenses charged separately.
303
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
363
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
460
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
303
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
424
Dismantling of split console/cassette up to 10 kW + disposal. Taking into account the scope of work. Separate call-out fee.
121
Dismantling of split console cassette 12-16 kW + disposal, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate departure.
182
Dismantling of split console/cassette up to 10 kW Separate call-out
303
Dismantling of a 12-16 kW split console cassette, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate departure.
363
Disassembly of the console/cassette separately inside the unit if the ceiling is up to 16 kW, separate exit by type of repair, taking into account the road within the Costa del Sol.
242
Separate dismantling of the outdoor unit up to 10 kW. Separate call-out fee.
182
Dismantling of a separate outdoor unit 12-16 kW separate trip taking into account the classic location, taking into account elevators (excluding cranes and hoists)
242
Installation of air conditioners in difficult conditions (metal structures, at height, multiple walls, or other conditions as agreed). Taking into account the complexity of the work. Travel expenses are charged separately.
61
Service and repair
Price €
(con IVA)
Professional cleaning of wall-mounted air conditioners
75
Professional cleaning of duct-type air conditioners
95
Professional cleaning of cassette-type air conditioners
130
Washing the outdoor unit of a single-fan air conditioner
40
Washing the external unit of a two-fan air conditioner
60
Manufacture of filters for duct-type air conditioners
25
Diagnostics of air conditioners up to 10 kW
60
Diagnostics of air conditioners 10-16 kW
95
Technician visit + diagnostics outside the service area price per km
under discussion
Replacement of compressor condenser price per set
250
Replacement or repair of the control board
from 500
Air conditioner refill with freon (freon R-410, R-32) price per 100 g
30
Replacement of thermal insulation Price per m/page
15
Repairing the drainage system or cleaning it
85
Installation of a drainage pump
125
Elimination of freon leakage split up to 5 kW capacity
180
Elimination of freon leakage in split systems with a capacity of 5-12 kW
300
Elimination of freon leakage in multi-split systems with a capacity of up to 12 kW
350
Transportation costs
25
Specialist visit to calculate the installation of air conditioning systems
50
Installation work
Price €
(con IVA)
The set includes (2 pipes, insulation, inter-unit connection cable, drainage)
Interblock main line kit price per m/p 6-9 mm (1/4-3/8)
48
Interblock main line set price per m/p 6-12 mm (1/4-1/2)
51
Conjunto de tubería intermedia Precio por metro lineal 9-16 mm (3/8-5/8)
54
Interblock main line kit price per m/p 12-19 mm (1/2-3/4)
61
Chasing for main line price per m/p
36
Laying of inter-block trunk line (2 copper pipes, inter-block cable, drainage) with regard to laying communications or if installation is more than 3 meters
24
Connection to the drainage system, including materials (installation of a siphon, a groove for it, fittings, transitions)
97
Insertion into a drainpipe of any diameter, special connector for the pipe
61
Installation of drainage “broaching” if this is not included in the *standard* price per 1 m, taking into account soft or rigid pipes + fittings and fasteners
12
Installation of a drainage pump
97
Installation of decorative box, taking into account the material with Fasina, price per 1 meter under the main line
30
Manufacture of air ducts from sheet insulation 400x200, price per 1 m of product
91
Manufacture of air ducts from sheet insulation 600x200, price per 1 m of product
103
Manufacture of air ducts from sheet insulation 800x200, price per 1 m of product
121
Manufacture of air ducts from sheet insulation adapter or complex shape price per product
145
Cable up to 2.5 square meters, including corrugation, price per meter/piece. Pull using your preferred method, either separately from the outlet or from the switchboard, price per meter
12
Low-voltage cable, including corrugation, price per meter/length. Pulling using preferred methods, price per meter
6
Dismantling/installation of Armstrong ceiling type price per m2
30
Removing the ceiling to the right size or enlarging the opening, plasterboard type, price per opening
61
Transportation costs are only paid for trips to Malaga-Manilva, or if there is a delay on the part of the customer and we need to make a repeat trip.
24
Urgent diagnostics: travel expenses of €20 are payable; price depends on the system: materials are charged separately, service cost is 50/50.
61
Installation of the AirZone system
Price €
(con IVA)
AirZone installation: complete pre-installation, pulling of communications, including corrugated pipes and cables, installation of motorized grilles. Price per zone, including centrolites, etc.
242
Installation of AirZone after installation or on ready-made communications, taking into account corrugated pipes and cables, taking into account the installation of a motorized grille, price per zone
121
Installation of diffusers + marking, or installation of motorized diffusers under AirZone
36
* INSTALLATION STANDARD *
1. The outdoor unit is mounted on vibration mounts if there are intermediate brackets + vibration mounts on the bracket.
2. The minimum length of the inter-unit route is 3 m.
3. Drainage (winter) is carried out to the nearest drain point up to 1.5 m, if further according to p9.
4. The installer is obliged to work with a vacuum cleaner and leave the site clean!
Wall-mounted units
Price €
(con IVA)
Installation of a wall-mounted split air conditioner 09-12 (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main line
303
Installation of a wall-mounted split air conditioner 18-24 (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main line
363
Installation of an indoor wall-mounted multi-unit or addition of one indoor unit. Taking into account the scope of work. Separate call-out fee.
121
Installation of an indoor wall-mounted multi-unit or addition of one indoor unit. Taking into account the scope of work. Separate call-out fee.
242
Installation of an outdoor split unit up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
242
Installation of an outdoor split unit up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
303
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
363
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
460
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
303
Installation of an outdoor multi-split system up to 12 kW, including connection. Including a range of works. Travel expenses are charged separately.
424
Dismantling of wall-mounted split air conditioner up to 7 kW + disposal. Taking into account the scope of work. Separate call-out fee.
61
Dismantling of wall-mounted split units up to 7 kW. Including a range of works. Separate call-out charge.
182
Disassembly of a separate wall-mounted unit up to 7 kW, separate trip before repair, taking into account the road within the Costa del Sol area.
145
Disassembly of a separate outdoor unit up to 10 kW, separate call-out
182
Dismantling of a separate outdoor unit 12-16 kW separate trip taking into account the classic location, taking into account elevators (excluding cranes and hoists)
242
Installation of air conditioners in difficult conditions (metal structures, at height, multiple walls, or other conditions as agreed)
61
Channel blocks
Price €
(con IVA)
Installation of a split duct air conditioner up to 10 kW (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation, adapter + material, connection of wall-mounted remote control or pulling wires for remote control if there is corrugated pipe) WITHOUT main lines, WITHOUT dismantling/installation of ceilings.
726
Installation of a split duct air conditioner up to 12-16 kW (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation, adapter + material, connection of a wall-mounted control panel or pulling wires for the control panel if there is a corrugated pipe) WITHOUT main lines, WITHOUT dismantling/installation of ceilings.
968
Installation of an indoor duct multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation, adapter + materials) WITHOUT dismantling/installing ceilings, taking into account the scope of work!
424
Installation of an indoor duct multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation, adapter + materials) WITHOUT dismantling/installing ceilings). Travel expenses are charged separately.
484
Installation of an outdoor split unit up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
242
Installation of an outdoor split unit up to 12 kW, including connection. Including a range of works. Travel expenses charged separately.
303
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
363
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
460
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
303
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
424
Dismantling of a duct split system up to 10 kW + disposal. Taking into account the scope of work. Separate call-out fee.
182
Dismantling of a 12-16 kW split duct unit + disposal, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate call-out fee.
303
Dismantling of a duct split system up to 10 kW + disposal. Taking into account the scope of work. Separate call-out fee.
182
Dismantling of a 12-16 kW split duct unit + disposal, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate call-out fee.
303
Installation of air conditioners in difficult conditions (metal structures, at height, multiple walls, or other conditions as agreed)
61
Console (wall-ceiling) blocks
Price €
(con IVA)
Installation of a 5-12 kW split console air conditioner (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main line
605
Installation of a 13-16 kW split console air conditioner (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main line
847
Installation of an indoor console/cassette multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation) (WITHOUT dismantling/installing ceilings), taking into account the scope of work!
363
Installation of an indoor console/cassette multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation) (WITHOUT dismantling/installing ceilings). Taking into account the scope of work. Travel expenses are charged separately.
460
Installation of an outdoor split unit up to 12 kW, including connection. Including a range of works. Travel expenses charged separately.
242
Installation of an outdoor split unit up to 12 kW, including connection. Including a range of works. Travel expenses charged separately.
303
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
363
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
460
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
303
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
424
Dismantling of split console/cassette up to 10 kW + disposal. Taking into account the scope of work. Separate call-out fee.
121
Dismantling of split console cassette 12-16 kW + disposal, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate departure.
182
Disassembly of a separate indoor unit of up to 16 kW, separate trip by type of repair, taking into account the road within the Costa del Sol area.
303
Dismantling of split duct systems up to 10 kW. Separate call-out charge.
363
Dismantling of a 12-16 kW split duct unit, taking into account the classic layout and elevators (excluding cranes and hoists). Separate departure.
363
Disassembly of a separate outdoor unit up to 10 kW, separate call-out
182
Dismantling of a separate outdoor unit 12-16 kW separate trip taking into account the classic location, taking into account elevators (excluding cranes and hoists)
242
Installation of air conditioners in difficult conditions (metal structures, at height, multiple walls, or other conditions as agreed). Taking into account the complexity of the work. Travel expenses are charged separately.
61
Cassette units
Price €
(con IVA)
Installation of a 5-12 kW split cassette air conditioner (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main lines, WITHOUT dismantling/installing ceilings.
605
Installation of a 13-16 kW split cassette air conditioner (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main lines, WITHOUT dismantling/installing ceilings.
847
Installation of an indoor console/cassette multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation) (WITHOUT dismantling/installing ceilings), taking into account the scope of work!
363
Installation of an indoor console/cassette multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation), (WITHOUT dismantling/installing ceilings). Taking into account the scope of work. Travel expenses are charged separately.
460
Installation of an outdoor split unit up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
242
Installation of an outdoor split unit up to 12 kW, including connection. Including a range of works. Travel expenses charged separately.
303
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
363
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
460
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
303
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
424
Dismantling of split console/cassette up to 10 kW + disposal. Taking into account the scope of work. Separate call-out fee.
121
Dismantling of split console cassette 12-16 kW + disposal, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate departure.
182
Dismantling of split console/cassette up to 10 kW Separate call-out
303
Dismantling of a 12-16 kW split console cassette, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate departure.
363
Disassembly of the console/cassette separately inside the unit if the ceiling is up to 16 kW, separate exit by type of repair, taking into account the road within the Costa del Sol.
242
Separate dismantling of the outdoor unit up to 10 kW. Separate call-out fee.
182
Dismantling of a separate outdoor unit 12-16 kW separate trip taking into account the classic location, taking into account elevators (excluding cranes and hoists)
242
Installation of air conditioners in difficult conditions (metal structures, at height, multiple walls, or other conditions as agreed). Taking into account the complexity of the work. Travel expenses are charged separately.
61
Service and repair
Price €
(con IVA)
Professional cleaning of wall-mounted air conditioners
83
Professional cleaning of duct-type air conditioners
105
Professional cleaning of cassette-type air conditioners
143
Washing the outdoor unit of a single-fan air conditioner
44
Washing the external unit of a two-fan air conditioner
66
Manufacture of filters for duct-type air conditioners
28
Diagnostics of air conditioners up to 10 kW
66
Diagnostics of air conditioners 10-16 kW
105
Technician visit + diagnostics outside the service area price per km
under discussion
Replacement of compressor condenser price per set
275
Replacement or repair of the control board
from 550
Air conditioner refill with freon (freon R-410, R-32) price per 100 g
33
Replacement of thermal insulation Price per m/page
17
Repairing the drainage system or cleaning it
94
Installation of a drainage pump
138
Elimination of freon leakage split up to 5 kW capacity
198
Elimination of freon leakage in split systems with a capacity of 5-12 kW
330
Elimination of freon leakage in multi-split systems with a capacity of up to 12 kW
385
Transportation costs
28
Specialist visit to calculate the installation of air conditioning systems
55
Installation work
Price €
(con IVA)
The set includes (2 pipes, insulation, inter-unit connection cable, drainage)
Interblock main line kit price per m/p 6-9 mm (1/4-3/8)
53
Interblock main line set price per m/p 6-12 mm (1/4-1/2)
56
Conjunto de tubería intermedia Precio por metro lineal 9-16 mm (3/8-5/8)
60
Interblock main line kit price per m/p 12-19 mm (1/2-3/4)
67
Chasing for main line price per m/p
40
Laying of inter-block trunk line (2 copper pipes, inter-block cable, drainage) with regard to laying communications or if installation is more than 3 meters
27
Connection to the drainage system, including materials (installation of a siphon, a groove for it, fittings, transitions)
106
Insertion into a drainpipe of any diameter, special connector for the pipe
67
Installation of drainage “broaching” if this is not included in the *standard* price per 1 m, taking into account soft or rigid pipes + fittings and fasteners
13
Installation of a drainage pump
106
Installation of decorative box, taking into account the material with Fasina, price per 1 meter under the main line
33
Manufacture of air ducts from sheet insulation 400x200, price per 1 m of product
100
Manufacture of air ducts from sheet insulation 600x200, price per 1 m of product
113
Manufacture of air ducts from sheet insulation 800x200, price per 1 m of product
133
Manufacture of air ducts from sheet insulation adapter or complex shape price per product
160
Cable up to 2.5 square meters, including corrugation, price per meter/piece. Pull using your preferred method, either separately from the outlet or from the switchboard, price per meter
13
Low-voltage cable, including corrugation, price per meter/length. Pulling using preferred methods, price per meter
7
Dismantling/installation of Armstrong ceiling type price per m2
33
Removing the ceiling to the right size or enlarging the opening, plasterboard type, price per opening
67
Transportation costs are only paid for trips to Malaga-Manilva, or if there is a delay on the part of the customer and we need to make a repeat trip.
27
Urgent diagnostics: travel expenses of €20 are payable; price depends on the system: materials are charged separately, service cost is 50/50.
67
Installation of the AirZone system
Price €
(con IVA)
AirZone installation: complete pre-installation, pulling of communications, including corrugated pipes and cables, installation of motorized grilles. Price per zone, including centrolites, etc.
266
Installation of AirZone after installation or on ready-made communications, taking into account corrugated pipes and cables, taking into account the installation of a motorized grille, price per zone
133
Installation of diffusers + marking, or installation of motorized diffusers under AirZone
40
* INSTALLATION STANDARD *
1. The outdoor unit is mounted on vibration mounts if there are intermediate brackets + vibration mounts on the bracket.
2. The minimum length of the inter-unit route is 3 m.
3. Drainage (winter) is carried out to the nearest drain point up to 1.5 m, if further according to p9.
4. The installer is obliged to work with a vacuum cleaner and leave the site clean!
Wall-mounted units
Price €
(con IVA)
Installation of a wall-mounted split air conditioner 09-12 (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main line
333
Installation of a wall-mounted split air conditioner 18-24 (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main line
399
Installation of an indoor wall-mounted multi-unit or addition of one indoor unit. Taking into account the scope of work. Separate call-out fee.
133
Installation of an indoor wall-mounted multi-unit or addition of one indoor unit. Taking into account the scope of work. Separate call-out fee.
266
Installation of an outdoor split unit up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
266
Installation of an outdoor split unit up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
333
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
399
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
506
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
333
Installation of an outdoor multi-split system up to 12 kW, including connection. Including a range of works. Travel expenses are charged separately.
466
Dismantling of wall-mounted split air conditioner up to 7 kW + disposal. Taking into account the scope of work. Separate call-out fee.
67
Dismantling of wall-mounted split units up to 7 kW. Including a range of works. Separate call-out charge.
200
Disassembly of a separate wall-mounted unit up to 7 kW, separate trip before repair, taking into account the road within the Costa del Sol area.
160
Disassembly of a separate outdoor unit up to 10 kW, separate call-out
200
Dismantling of a separate outdoor unit 12-16 kW separate trip taking into account the classic location, taking into account elevators (excluding cranes and hoists)
266
Installation of air conditioners in difficult conditions (metal structures, at height, multiple walls, or other conditions as agreed)
67
Channel blocks
Price €
(con IVA)
Installation of a split duct air conditioner up to 10 kW (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation, adapter + material, connection of wall-mounted remote control or pulling wires for remote control if there is corrugated pipe) WITHOUT main lines, WITHOUT dismantling/installation of ceilings.
799
Installation of a split duct air conditioner up to 12-16 kW (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation, adapter + material, connection of a wall-mounted control panel or pulling wires for the control panel if there is a corrugated pipe) WITHOUT main lines, WITHOUT dismantling/installation of ceilings.
1065
Installation of an indoor duct multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation, adapter + materials) WITHOUT dismantling/installing ceilings, taking into account the scope of work!
466
Installation of an indoor duct multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation, adapter + materials) WITHOUT dismantling/installing ceilings). Travel expenses are charged separately.
532
Installation of an outdoor split unit up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
266
Installation of an outdoor split unit up to 12 kW, including connection. Including a range of works. Travel expenses charged separately.
333
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
399
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
506
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
333
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
466
Dismantling of a duct split system up to 10 kW + disposal. Taking into account the scope of work. Separate call-out fee.
200
Dismantling of a 12-16 kW split duct unit + disposal, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate call-out fee.
333
Dismantling of a duct split system up to 10 kW + disposal. Taking into account the scope of work. Separate call-out fee.
200
Dismantling of a 12-16 kW split duct unit + disposal, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate call-out fee.
333
Installation of air conditioners in difficult conditions (metal structures, at height, multiple walls, or other conditions as agreed)
67
Console (wall-ceiling) blocks
Price €
(con IVA)
Installation of a 5-12 kW split console air conditioner (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main line
666
Installation of a 13-16 kW split console air conditioner (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main line
932
Installation of an indoor console/cassette multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation) (WITHOUT dismantling/installing ceilings), taking into account the scope of work!
399
Installation of an indoor console/cassette multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation) (WITHOUT dismantling/installing ceilings). Taking into account the scope of work. Travel expenses are charged separately.
506
Installation of an outdoor split unit up to 12 kW, including connection. Including a range of works. Travel expenses charged separately.
266
Installation of an outdoor split unit up to 12 kW, including connection. Including a range of works. Travel expenses charged separately.
333
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
399
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
506
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
333
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
466
Dismantling of split console/cassette up to 10 kW + disposal. Taking into account the scope of work. Separate call-out fee.
133
Dismantling of split console cassette 12-16 kW + disposal, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate departure.
200
Disassembly of a separate indoor unit of up to 16 kW, separate trip by type of repair, taking into account the road within the Costa del Sol area.
333
Dismantling of split duct systems up to 10 kW. Separate call-out charge.
399
Dismantling of a 12-16 kW split duct unit, taking into account the classic layout and elevators (excluding cranes and hoists). Separate departure.
399
Disassembly of a separate outdoor unit up to 10 kW, separate call-out
200
Dismantling of a separate outdoor unit 12-16 kW separate trip taking into account the classic location, taking into account elevators (excluding cranes and hoists)
266
Installation of air conditioners in difficult conditions (metal structures, at height, multiple walls, or other conditions as agreed). Taking into account the complexity of the work. Travel expenses are charged separately.
67
Cassette units
Price €
(con IVA)
Installation of a 5-12 kW split cassette air conditioner (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main lines, WITHOUT dismantling/installing ceilings.
666
Installation of a 13-16 kW split cassette air conditioner (bracket, vibration mount, holes, soldering (pipe up to 1 m), renovation) WITHOUT main lines, WITHOUT dismantling/installing ceilings.
932
Installation of an indoor console/cassette multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation) (WITHOUT dismantling/installing ceilings), taking into account the scope of work!
399
Installation of an indoor console/cassette multi-unit or addition of one indoor unit (soldering (pipe up to 1 m), renovation), (WITHOUT dismantling/installing ceilings). Taking into account the scope of work. Travel expenses are charged separately.
506
Installation of an outdoor split unit up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
266
Installation of an outdoor split unit up to 12 kW, including connection. Including a range of works. Travel expenses charged separately.
333
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
399
Installation of a 12-16 kW outdoor split unit, including connection. Including a range of works. Travel expenses charged separately.
506
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
333
Installation of an outdoor multi-split system up to 12 kW, including connection. Taking into account the scope of work. Travel expenses are charged separately.
466
Dismantling of split console/cassette up to 10 kW + disposal. Taking into account the scope of work. Separate call-out fee.
133
Dismantling of split console cassette 12-16 kW + disposal, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate departure.
200
Dismantling of split console/cassette up to 10 kW Separate call-out
333
Dismantling of a 12-16 kW split console cassette, taking into account the classic layout, taking into account elevators (excluding cranes and hoists). Taking into account the scope of work. Separate departure.
399
Disassembly of the console/cassette separately inside the unit if the ceiling is up to 16 kW, separate exit by type of repair, taking into account the road within the Costa del Sol.
266
Separate dismantling of the outdoor unit up to 10 kW. Separate call-out fee.
200
Dismantling of a separate outdoor unit 12-16 kW separate trip taking into account the classic location, taking into account elevators (excluding cranes and hoists)
266
Installation of air conditioners in difficult conditions (metal structures, at height, multiple walls, or other conditions as agreed). Taking into account the complexity of the work. Travel expenses are charged separately.
67
Order air conditioning maintenance from A-Clima
Leave a request online and our managers will contact you within a day.
Maintenance of climate control equipment
Need Help?